Shop podľa Kategórií

Elektrická Spájkovačka LCD Digitálny Displej Nastaviteľná Teplota 220V 80W Spájky, Železo Set Zváranie Prepracovať Stanice Oprava Nástrojov

Novinka

€7.04

Product Info

Voltage: AC220-240V OR AC100-130V Power: 80W Frequency: 50Hz/60Hz Temperature Range: 180~500℃/356~932℉ Temperature Stability: ±5℃ Heating Type: Wmore Ceramics Element Soldering Iron Tips: 900M-B1.2 Wire Length: 1.4m / 55.12in Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in Soldering Iron Weight: Approx.96g/3.4oz Package Size: Approx. 254*55*35mm/10*2.2*1.4n Package Weight: Approx. 139g / 4.9oz

SET-1

Package List : 1pcs 80W Solder iron

SET-2

Package List : 1pcs 80W Solder iron 1pcs Stand 5pcs iron tips ( I / B / K / 3C / 2.4D ) 1pcs Sponge

SET-3

Package List : 1pcs 80W Solder iron 5pcs iron tips ( I / B / K / 3C / 2.4D ) 1pcs Sponge 1pcs Stand 1pcs Solder Wire 1pcs Sucker

SET-4

Package List: 1pcs 80W Solder iron 5pcs iron tips ( I / B / K / 3C / 2.4D ) 1pcs Sponge 1pcs Stand 1pcs Solder Wire 1pcs Sucker 1pcs Rosin

SET-5

Package List: 1pcs 80W Solder iron 5pcs iron tips ( I / B / K / 3C / 2.4D ) 1pcs Sponge 1pcs Stand 1pcs Solder Wire 1pcs Sucker 1pcs Rosin 1pcs Solder Wick CP-2015 1pcs Ceramic heater

SET-6

Package List: 1pcs 80W Solder iron 5pcs iron tips ( I / B / K / 3C / 2.4D ) 1pcs Sponge 1pcs Stand 1pcs Solder Wire 1pcs Rosin 1pcs Solder Assist SA-10

Product Point

Press the (+) button once to increase 1℃; press and hold it to increase temperature continuously.Press the (-) button once to reduce 1℃; press and hold it to reduce temperature continuously.The newly set temperature will be saved after 3 seconds,and will keep the temperature for next time powering-on.When (℉) or (℃) symbol flashes, it means the heating core has not reached the set temperature.

Product Point

Temperature Calibration: 1.After 60 seconds of power on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good touch. 2.When thermometer displays a stable temperature (about 2 seconds), write down the temperature. 3.Move soldering iron away from thermometer; press the (-) and (+) button at the same time to enter temperature Calibration. 4.Input adjustment quantity.Adjustment quantity=set temperature - measured temperature (see example) 5.Press the (-) and (+) at the same time to exit temperature interface, finished.Example 1, when setting temperature is 350℃ while measured temperature is 342℃, the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface.b.press the "+" button till the LCD displays 8℃ c.press the (-) and (+) at the same time to exit

Product Size

Please do not touch the soldering tip and tube when the power is turned on.

Operational Attention

Parameter setting: 1.To press the red and white button both at the same time before it is power on, power on,after the LCD is working,stop to press the button, you will enter the setting menu.The LCD shows (F) or (C) 2.Press the white button to choose C(degree centigrade) or F(Fahrenheit).Press the Red button to choose Element U20(JCD01),U20(JC D02),U30(JCD03),U40(JCD04). 3.Pressing the (-) and (+) at the same time to save your setting operation and quit the setting menu(finished) To protect the user from scald, when on the setting menu, it will stop heating.Failure warning indication The LCD shows (OP): the heating element is open circuit.Solution:1.change the element.2.To confirm that whether the pin of element is oxidized.The LCD shows(E1):The outlet is poor contact,or thebattery source interfering the soldering iron that it is power down.Solution:1.Unplug the soldering iron.2.Close the interfering source. 3.To use it far away from the interfering source.

FAQ

Q: received a package

A: Please check the product carefully

Q: before use

A: Please read the instructions carefully

Product Detail

All products are made of high quality materials and quality assurance.

Štítky: ksger t12, bakuman, pcb zvaru, yihua 853d časti, spájkovacia stanica, bga prepracovať stanice, prepracovať stanice, ako spájkovacia súprava, bafang displej, prenosné hot pinzety spájkovanie.

Funkcia 12 digitálna spájkovacia stanica
Funkcia 9 Teplota Nastaviteľné Spájkovačka
Funkciu 15 elektrická spájkovačka zváranie
Funkciu 11 digitálny spájkovačka
Výstupná Teplota Vody 180-500C
Certifikácia CE
Funkcia 4 nastaviteľné spájkovačka
Vstup Voltagle 220V
Výstupný Výkon 80W
Názov Značky letme
Číslo Modelu 936
Rozmery EÚ NÁM Plug
Funkcia 3 Spájkovacie Stanice
Je To Inteligentné Zariadenie Áno
Funkcia 10 Spájkovačka 80W
Funkcia 8 Nastaviteľné Spájkovacie Stanice
Funkcia 14 elektrická spájkovačka nastaviteľné
Funkcia 1 spájkovačka
Funkcia 7 Teplota Spájkovačka
Teplotná Stabilita 1
Funkcia 5 spájkovačka nastaviteľné
Funkcia 6 digital soldering iron station
Funkcia 2 spájky, spájkovačka
Pôvod CN(Pôvodu)
Funkcia 13 spájkovačka 220v

Napísať recenziu

Elektrická Spájkovačka LCD Digitálny Displej Nastaviteľná Teplota 220V 80W Spájky, Železo Set Zváranie Prepracovať Stanice Oprava Nástrojov

Elektrická Spájkovačka LCD Digitálny Displej Nastaviteľná Teplota 220V 80W Spájky, Železo Set Zváranie Prepracovať Stanice Oprava Nástrojov

Súvisiace produkty
Produkt bol pridaný do zoznamu porovnávať